| Last Modified: 11-29-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Navigation/Multi Info Display | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000000OB301FX |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: INSPECTION PROCEDURE (2008 Sequoia) | ||
|
Display does not Dim when Light Control Switch is Turned ON |
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK IMAGE QUALITY SETTING |
|
(a) Enter the display adjustment screen by pressing the "DISP" switch. |
(b) Turn the light control switch to the TAIL position.
(c) Check if "Day Mode" on the display is ON.
OK:
"Day Mode" is ON.
|
|
2. |
CHECK VEHICLE SIGNAL (DISPLAY VEHICLE SIGNAL) |
|
(a) Enter the "Display Check" mode (Vehicle Signal Check Mode)
|
(b) Check that the display changes between DIM and BRIGHT according to the light control switch operation.
OK:
|
Light Control Switch Condition |
Display Condition |
|---|---|
|
TAIL or ON |
ON |
|
OFF |
OFF |
HINT:
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
|
|
|